Welcome to another FREE Woodworking Resource sponsored by your fellow
woodworkers at Shopsmith
Complete the short Request Form at right and we'll send you a FREE Fact Kit which includes a half-hour TV Show, "Sawdust Therapy" that is fun and entertaining to watch.
The Fact Kit explains the amazing story about the famous and affordable MARK V 5-Tools-In-1 Complete Home Woodworking System that packs the five most needed woodworking tools into a single, easy-to-use machine. 
The best part is that if you have space for a bicycle - you have room for a MARK V.

Learn the real story of why over a million folks just like you own a
Shopsmith MARK V.

Send For Your FREE Woodworking Fact Kit and "Sawdust Therapy" TV Show.

First Name*:
Last Name*:
Street Address*:

USA Canada

E-mail Address*:

The Keyed Corner Jewelry Box

This is the classiest-looking jewelry box we've seen that can be built in a single weekend!

Whether simple or elaborate in design, jewelry boxes and keepsake boxes always make treasured gifts for family and friends. This particular box is made from highly figured woods using some unique construction techniques, including corners with keyed accents that give it a one-of-a-kind look.


Getting started
Begin by making your wood selection. You won't need much, so you could actually make this box from scraps you already have laying around the shop. We made ours from quarter-sawn red oak, walnut and spalted beach, but with the wide variety of unique, exotic woods available today through a host of reputable suppliers, your options are virtually limitless.

Sides and Ends
Rough cut some 3/4" stock for the Sides (A) and Ends (B) to approximately 3-1/2" x 29", then plane your stock down to 1/2" using your Thickness Planer. Once you've attained the desired 1/2" thickness, joint one edge, then rip and joint the opposing edge to a finished width of 3-3/16".



  2009 Shopsmith Inc. All rights reserved.

  Policies | Contact Us | Links | Corporate Web Site